Quick Response Waterproof Brushless ESC For RC Surfboard Mofet Material

Waterproof Brushless ESC Controller 12S 400A with Red Cover for RC Surfboard

 

 

Waterproof brushless ESC Basic information:

 

 

Voltage	Current	Size(mm)	weight(g)	BEC (Volts/Amps)	Box Programming support	Computer Programming support	Firmware update
3-50V	400A	120*63*37mm	690g	OPTO	Yes	Yes	Yes

 

 

Features:

 

 

The unmanned electromechanical adjustment has a total of five lines. 3 at one end, 2 at the other end, 3 with the motor connected to 3 lines, no matter whether it is positive or negative.

 

As long as the direction of rotation is reversed, any two wires can be exchanged. The other two are power cords, which are directly connected to the battery. Forgot to have a thin servo plug, this is directly connected to the flight controller or receiver.

 

Reverse function. the delay time of reverse is adjustable.

 

The power of the motor forward/ reverse can be set.

 

Automatically detection the throttle route or can be set a fixed number by manual operation.

 

Auto cut off the power within 3 seconds if no radio signs.

 

Timing setting may be adjusted (0°-30°) to suit the motor type.

 

Setting function value:

 

1. Reverse: On/Off.

 

2. Timing:0°,1°,2°,3°,4°……30°.

 

3. Frequency: 8KHz, 16 KHz, 32 KHz.

 

4. Acceleration: Soft / Medium / Hard.

 

5. Accumulator type:NiCd/NiMh,Li-Ion/Li-Pol,LiFe.

 

6. NiCd/NiMH CUTOFF:×0.05,0.4V,0.5V,0.6V,0.7V,0.8V,0.9V,1.0V.×0.05 means the cut off voltage is 5% the voltage while connecting.

 

7. Number of cells:Auto,2S,3S,4S,5S,6S,7S,8S,9S,10S,11S,12S,16S.

 

8. LiIo/Pol CUTOFF:2.0V,2.1V,2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V,2.9V,3.0V,3.1V,3.2V,3.3V,3.4V,3.5V,3.6V.

 

9. LiFe cutoff:2.2V,2.3V,2.4V,2.5V,2.6V,2.7V,2.8V

 

10. Cut Off Type::Slow down,Hard. l

 

11. Power limited forward: Off, 75%, 50%, 25%.

 

12. Power limited reverse: Off, 75%, 50%, 25%.

 

13. Delay time when direction convert: 0.25S, 0.5S, 0.75S, 1S, 1.5S, 2S, 3S, 5S.

 

14. Reverse point:Auto,fixed 1.0mS,fixed 1.1mS,fixed 1.2mS,fixed 1.3mS.

 

15. Forward point:Auto,fixed 1.7mS,fixed 1.8mS,fixed 1.9mS,fixed 2.0mS.

 

16. Throttle curve: Logarithmical,Linear,Exponential.

 

17. Rotation direction: Left, Right.

 

18. Timing monitor (TIMING MONTITOR): ON, Off.

 

Note:the red mark is the factory default value,you can setting function value by youself.

 

Pictures: